Solar Panels > Mono Crystalline

 

The solar cells are embedded in UV-resistant EVA plastic. The entire module is protected against dust and splash water (IP65). This ensures the long-term outdoor use. Each module is optically, mechanically, and electrically tested

 

 

Mono-60 Series 235W-260W

 

✓ High performance modules of mono-crystalline solar cells
✓ Connection box with 6 bypass diodes
✓ 3,2 mm thick safety glass of high transparence
✓ 12 year product warranty
✓ 12 years guarantee at 90% rated performance
✓ 30 years guarantee at 80% rated performance
✓ Up to + 3% positive power tolerance
✓ Cell efficiency up to 18.52 %

 

 

 

Connection
Connection box	6 bypass diodes, IP67
Wire cross section (Ø , mm2)	4.0
Cable length (mm)	900
Connector type	MC4 / MC4 compatible

 

 

 

 

Electrical Data		AE 235M-60	AE 240M-50	AE 245M-60	AE 250M-60	AE 255M-60	AE 260M-60
Nominal power/Wattage	Pm (Wp)	235	240	245	250	255	260
Open circuit voltage	Voc (V)	36.10	36.30	36.6	36.9	37.2	37.50
Short-circuit current	Isc (A)	8.57	8.64	8.69	8.74	8.84	8.89
Voltage at max power	Vmp (V)	28.80	29.10	29.4	29.7	30.1	30.60
Current at max power	Imp (A)	8.16	8.25	8.33	8.42	8.47	8.50
Module efficiency	(%)	14.45	14.75	15.06	15.37	15.67	15.98
Cell efficiency	(%)	16.74	17.10	17.45	17.81	18.16	18.52

 

The electrical data apply to Standard Test Conditions (STC): Irradiance of 1000 W/m² with spectrum AM 1.5 and a cell temperature of 25°C.

 

System voltage	(V)	1000
Temp. coefficient Voc	(%/°C)	-0.348
Temp. coefficient Isc	(%/°C)	+0.031
Temp. coefficient Pm	(%/°C)	-0.460
Operating temperature	(°C)	-40 to 85
NOCT	(°C)	48 +/- 2

 

 

 

 

---

 

* Solar Electrical Technologies reserves the right to make specification changes without prior notice. Please contact us to obtain the latest specifications.

 

 

 

Go Back to Products Page